Spare parts for barista tools: replace what you need

Is just one part worn out or missing? My advice: first check which Barista Essentials tool you have and replace only what is needed. Here you will find a bar for the mini knock drawer, replacement heads for the group-head brush, a magnet for Puck Screen V2 and separate portafilter handles. These are not complete tools. Check the model and fitting before ordering. The guide to compatibility and replacement is below the products.

Advice from Geert-Jan de Baristaman — Specialty Coffee Trainer & Barista Coach (10+ years of experience).

First check your Barista Tool, then choose the part

Your knock box still works well, but the rod is worn. Or your brush handle is fine, while the bristles are bent. In that case, a single part may be enough. Therefore, in this collection, first search for the tool you already use. The brand of your espresso machine is usually less important than the model of the knock box, brush, or puck screen.

A new rod for the mini knock box

The spare knock box rod in this selection belongs to the Barista Essentials mini knock box. Look at your own knock box, the old rod, and the way it attaches. The supplier also sells rods for other knock boxes and bins. This does not make them interchangeable. When ordering, make sure you choose the version for the mini knock box.

First remove any coffee grounds so you can see what the old rod and the attachment look like. If only the rod is worn and the knock box is otherwise fine, you can focus on this part. If the attachment is also damaged or you no longer know the model, first have what you need assessed. The knock box shown is not part of the single part.

Replace the brush head if the bristles are bent

The spare heads for the group head brush belong to the Barista Essentials brush with a replaceable head. With that model, you unscrew the old head and screw on the new one. First check if your brush is designed for this. A brush from another brand may have a different connection, even if the handle looks similar. The packaging contains five spare heads.

If the bristles are so bent that you can no longer properly reach coffee grounds, it is a practical time to consider a replacement. A new head does not replace cleaning: also keep the handle and the connection clean. For cleaning the machine itself, follow the machine manual. You do not need to remove any parts of the machine to replace a brush head.

Lost the magnet? Check your puck screen first

The separate puck screen magnet is intended for the Barista Essentials Puck Screen V2. With it, you can remove the screen from the filter basket. First check if you have that version and if your current screen may have already been supplied with a magnet. With a new screen, a separate magnet is therefore not always necessary.

The fact that a screen is made of metal does not mean that this magnet will work with it. The supplier confirms the combination with their own V2. The size of your espresso machine does not determine this choice; the type of screen does. The magnet also does not change the size of the screen that must fit in your filter basket.

A separate handle for your portafilter

Is the filter holder itself still fine, but do you want to replace the handle? There is a wooden portafilter handle and a black portafilter handle. You only buy the handle: the head and the filter basket are not included. Before ordering, have the thread and attachment checked to see if they fit your filter holder. The diameter of the filter basket does not prove that. These handles are not confirmed as universally fitting other brands.

For the handles, the full external dimensions, thread size, and compatible model overview are not confirmed. For the black version, the exact material is also not confirmed. For the wooden version, the variant is indicated as wood; a type of wood is not confirmed. Therefore, give the supplier your brand, model, and a photo of the connection. With a damaged attachment, only a new handle may be insufficient.

Which dimensions are confirmed?

The supplier states 25 × 20 mm for the separate puck screen magnet, without separately stating the directions of the dimensions. The full external dimensions and connection dimensions of the mini knock box rod and the spare brush heads are not confirmed. First compare the explicitly mentioned tool and version. Do not infer fit from a photo, a similar length, or an unconfirmed thread size.

This is how you prevent ordering the wrong part

Place your existing tool and the old part next to each other. Look up a brand or model designation and check the product photos and description. Measure where that helps, but do not use a similar length or screw shape as proof that it fits. If in doubt, take a photo of the entire tool and a close-up photo of the connection. This allows the seller to look at it much more specifically.

Choose a single part or a complete tool

Geert-Jan uses Barista Essentials tools during his almost daily workshops. From that experience, he helps you understand what you are replacing and why. Are you actually looking for a complete knock box, a new brush, or an entire puck screen? Then use the corresponding collection below. This keeps it clear what you are buying and prevents you from mistaking a single part for a complete tool.

Frequently Asked Questions

Do these parts also fit tools from other brands?

That has not been confirmed. The parts in this collection have been selected for the Barista Essentials tools mentioned. Check the exact model and connection. A similar photo, length, or thread is not enough to determine whether a part from another brand will fit.

For which ejector plate is the spare ejector rod intended?

The version selected here is intended for the mini knock box from Barista Essentials. The supplier also sells other versions. Please check the ‘Mini knock box’ variant when ordering. You are purchasing a separate rod, not a complete knock box.

When should I replace the head of my group brush?

Look at the bristles and how well you can remove coffee grounds with them. If the bristles are permanently bent and you can no longer reach the edge properly, then it makes sense to replace them. Do check that you have the Barista Essentials brush with a replaceable head; these heads are not universal.

Does the separate magnet work with every metal puck screen?

No. Barista Essentials states that this individual magnet only fits its Puck Screen V2. Not every metal screen is magnetic. Check the version and what you already have, so you don't buy an extra magnet when one is already included with your screen.

Does the loose portafilter handle fit my filter holder?

This is not confirmed for every model. You are buying a separate portafilter handle without the filter basket or filter holder. Have the thread and attachment checked before ordering with the brand, model and a photo of your existing filter holder. The diameter of your filter basket alone is insufficient. You can ask for help via contact with De Barista Shop.

I have another question

Is your question not listed? Contact us. We are happy to help you choose the right product.

Collection: Spare parts for barista tools: replace what you need

Is just one part worn out or missing? My advice: first check which Barista Essentials tool you have and replace only what is needed. Here you will find a bar for the mini knock drawer, replacement heads for the group-head brush, a magnet for Puck Screen V2 and separate portafilter handles. These are not complete tools. Check the model and fitting before ordering. The guide to compatibility and replacement is below the products.

Advice from Geert-Jan de Baristaman — Specialty Coffee Trainer & Barista Coach (10+ years of experience).

Losse zwarte reserve-uitklopstang op een mini-uitkloplade; de lade is niet inbegrepen.